Commonly, people are ignorant of the mold growth in their homes. The mold-causing spores are microscopic particles that get suspended in the air. When you breathe, these particles enter your body and worsen people’s health conditions. Hence, it is likely that mold affects asthma and allergy conditions.
If you feel that your asthma or allergy is deteriorating and you cannot identify the reason, the cause might be mold development. As this can be serious, it is crucial to treat it immediately.
Mold Development and Health
Mold exposure develops specific symptoms in people similar to other triggers. People suffering from asthma or allergies may develop congestion, runny nose, frequent sneezing, skin rashes, watery eyes, chest stiffness, chronic cough, shortness of breath, and gasping.
People usually consider these as common asthma symptoms or allergies and are likely to ignore stimulation caused due to mold or pollen. It is normal to experience health issues seasonally, but off-season might be a reason for the inspection.
Some types of mold can be risky for health as they discharge harmful toxins. On the contrary, the reaction to mold exposure that happens due to allergies and asthma is usually different. Reactions to mold occur because a person’s immune system detects mold spores as a foreign particle and attacks. Hence, your body produces increased mucus and discharge water from the eyes to kick out allergens.
People who have allergic asthma may experience even worse symptoms. Their immune system discharges cells and chemicals that cause irritation and tightening of the bronchial tubing. It causes difficulty in normal breathing.
Mold Types Explained
Some of the mold types known to trigger asthma and allergy conditions include Alternaria, Aspergillus, and Trichophyton.
While airborne mold particles can aggravate asthma and allergy symptoms, the mold type Alternaria creates severe triggers. You must know that Alternaria can be found everywhere (outdoors) in air or soil.
Aspergillus is a widespread indoor and outdoor mold type. Hence, people come in contact very often. When asthma or allergy patients get exposed to Aspergillus, it can cause asthma attacks and deteriorating health conditions.
Constant exposure to Aspergillus may lead to developing a chronic disease known as bronchopulmonary aspergillosis (ABPA). This health disorder causes severe allergic reactions in the lungs, leading to bronchiectasis. Bronchiectasis is a severe health condition characterized by air passages infection and soreness. ABPA outbreaks lead to breathing issues that are similar to asthma.
Trichophyton causes fungal skin infections in humans. Asthma patients and people allergic to Trichophyton can develop severe symptoms when exposed.
Signs of Mold Growth
Mold grows in moist, dark, and warm conditions. When conditions are favorable, it can develop on all surfaces, including walls, floorings, cloths, plants, eatables, and other materials. Some of the everyday things contributing to mold growth include water spills, outflows, and condensation.
When the environment is humid, roof or pipe leaks, flood invades, lack of ventilation, surfaces become damp, and window seals break mold growth cannot be avoided.
A musty smell, surface discoloration, visible mold patches, or deterioration of health conditions without any evident reason are signs of mold growth.
Diagnosis and Treatment
If you are experiencing allergic reactions and deteriorated health, you must see a doctor. Your doctor might diagnose the root cause of your condition through various tests. The lab tests include skin allergy tests, radioallergosorbent tests, or blood tests. The treatment consists of managing the symptoms and avoiding further exposure.
HVAC System and Mold Growth
Air ducts in an HVAC system are usually damp because the cool air condenses to form water vapor. This moistness is an ideal place for mold development. When you switch on a mold-ridden AC system, the aerial particles suspend into the air and pollute the indoor air quality.
When people breathe in polluted air, they develop allergic reactions, or asthma patients may experience aggravated health conditions. At this time, you should seek a professional’s help and call Air Duct Cleaning in Gainesville.
You must know that good air quality is crucial for a healthy life.
It is vital to remove mold and take measures to avoid regrowth. For this, you first need to identify the mold source. Some of the high humid areas include the kitchen (sink area), bathrooms, laundry room, basements, and wall pipes.
As mold is hazardous, experts recommend seeking an expert’s help and call Mold Air Duct Cleaning in Gainesville. And if you want to treat it by yourself, you can:
– Rinse the affected areas with a cleansing agent and water. Let it dry completely
– Replace material that retains moisture
– Improve ventilation
- Roof vents allow air to discharge
- Use exhaust fans to remove moisture from dryers, washing machines, and other appliances
- Install exhaust in bathroom
– Use a humidifier and keep humidity level less than 50%
– Remove carpets in damp areas
– Use mold-resistant paints
– Call a technician to get the leakages repaired
– Place plastic covering over crawl areas and ensure they we well ventilated
– Remove indoor plants
– Regularly clean the drip pans of refrigerators and ACs
– Adopt practices that encourage groundwater drainage by clearing out vegetation and gutters
– Recycle old newspaper and books
Improve Your Lifestyle
If you want to avoid symptoms triggered by mold, you should adopt a few practices in your daily life:
Close Your Windows Before Sleeping
You should know that mold particles intensify at night time or when the external conditions are cool and damp. So, it would be ideal if you closed your windows before sleeping to avoid the outdoor mold.
Use a Facemask
It would help if you used a facemask to cover your nose and mouth. It will not allow mold particles to enter your body. It is crucial when performing certain activities like lawn mowing or cleaning activities.
Avoid Damp Conditions
You should avoid going outdoors instantly after a rainfall, foggy environment, moist conditions, monsoon, or when mold intensity is high.